Includes one wheel & center cap. Sold individually. Does not include tire or hardware.
Size: 16" x 7.5"
Fits: 1986-91 4WD Syncro Vanagon and all 1995-03 Eurovan models.
• For 4WD Syncro Vanagon Front & Rear Wheels: Purchase 5 nuts per wheel, available separately below.
• For Eurovan Front & Rear Wheels: Purchase 5 bolts per wheel, and one centering ring per wheel, available separately below.
1998-2000 Eurovan Owners: This wheel will not fit in the spare tire bay without our Oversize Spare Tire Kit.
Warning: This wheel will not fit 2WD Vanagon!
Heavy Duty Finned Drums: If you are going to use any GW alloy wheel with the GW finned drum brakes, you will need to purchase longer wheel studs.
Torque specs: Please torque the fasteners to 95 ft.lbs.
These wheels have an ET of 38mm. The ET number is the measure of how much the bolting surface of a wheel is "offset" from the center line of the wheel. An ET of zero means that the surface where the wheel bolts to the hub is located at exactly the mid point of the wheel. So, for example on an 8" wheel, 4" are outboard of the bolt surface, and 4" are inboard. If the ET is a positive number, that indicates a "positive offset", which means the bolt surface is moved OUT from the center point of wheel, which means the wheel and tire are moved IN towards the center line of the vehicle; so they stick out of the body LESS. The BIGGER the ET number, the MORE the tire and wheel are shoved into the body, and the LESS they stick out. Ideally, the maximum amount of ET that will fit the suspension design of the vehicle should be used, so the wheel sticks out as little as possible, and is therefore less likely to rub any part of the body.