COVID-related supply chain issues continue worldwide. We're doing the best we can to get items on the shelf! Please read our COVID UPDATE

Slider Door Stop

Made in the USA

Part #: GVW-251-843-876

VW Part #: 251843876

Works With: 1985-1991

Weight: 0.10 lbs

Receive 5% GoBucks credit when you purchase this item online.

Price: $9.95

Does your slider make a loud THUNK when it closes?  You probably need this formerly-NLA (no longer available) slider door stop.

3D printed from flexible (yet tough) material, this slider door stop has a taller spine to make installation easier.  You don't have to remove the door or the slider track cover (see Installation Notes tab for tips and tricks).

GoWesty-designed and made right here in the USA.

It is possible (although fiddly) to install this stop without removing the slider door or slider track cover. It is one of those jobs that rewards small hands and patience, but it is possible, trust us. 

We recommend removing the front screw holding the slider track cover so the bottom edge can be pulled outward to make a bit more room. The trick is to open the slider door a couple of inches and then fish the stop up in there holding it between the tips of your index and ring fingers and get it set in place in the slot. This will take some trial and error so don't get discouraged. Try and apply enough pressure to get it to stay in place in the slot — using a long screw driver to place some pressure on it while you hold it in position can help. Now, open the slider door fully, go around to the front edge, grab the spine sticking through the slot with a pair of pliers and pull it in to place — you will need to work back and forth along the spine to get it seated along the whole width.

Related Products